F6HAD's latest activity
-
My 2.2 idtec ex manual has the same issue, i replaced bottom rear mount and problem still there. If i remember it was around £230 new, i... -
F6HAD replied to the thread Rx8 Alloy Wheels.Definitely grey
-
Really appreciate the input, thanks. I went to a mechanic nearby and he took a look at the dipstick and said the oil was full of...
-
F6HAD replied to the thread 2.2 I-ctdi problem.If you can find a cheap engine and reasonable mechanic I would budget minimum £1000 all in. Too many variables to give you an accurate...
-
F6HAD replied to the thread 2.2 I-ctdi problem.If you’re wanting to keep the car, I would argue it’s cheaper to replace the engine. They’re old cars now, not always worth the hassle...
-
F6HAD replied to the thread 2.2 I-ctdi problem.Probably a blown turbo or possibly oil pump chain. Is your oil pressure warning light on? Without stating the obvious you really...
-
F6HAD replied to the thread Honda HDS help.84-1 means you’ve lost your calibration. Needs a HDS to run a neutralisation procedure.
-
F6HAD replied to the thread Rx8 Alloy Wheels.EBay. You need 64.1mm > 67.1mm
-
Let her drive from now on.
-
F6HAD replied to the thread Full throttle boost drops then comes up again 2.2ictdi.remove your intake manifold and thoroughly clean it out. Check the intake flap is clean has full free range of movement.. see if it helps
-
F6HAD replied to the thread Full throttle boost drops then comes up again 2.2ictdi.I just noticed it’s an ictdi not an idtec. More likely a blocked inlet and also clogged egr and intake runner control. Are you in the...
-
F6HAD replied to the thread Full throttle boost drops then comes up again 2.2ictdi.More likely a sticking or bad turbocharger
-
F6HAD replied to the thread VSA code 84-1.It’s normally when your VSA modulator has lost its calibration. You’ll need a Honda HDS to carry out a neutralisation procedure. I can...
-
I have been using google chrome for a few years now and get adverts every time I click on this accord website. So, seen the add for...
-
F6HAD replied to the thread HELP intermittent power loss.The fact you’re not getting any dtc codes with such a profound issue suggests you’ve got some error suppression going on in the remap...
